|
Post by ravenred on Jul 27, 2017 19:38:03 GMT -6
Does anyone know if the cables from a Vulcan classic will work for a Meanstreak? I'm changing bars and found a set for the classic already made and much cheaper than having to have them made
|
|
|
Post by lee on Jul 29, 2017 19:11:47 GMT -6
I won't say "no", but partzilla lists different parts for the Mean Streak and Classic (I looked at '06). The Classic and Nomad apparently use the same cables.
|
|
|
Post by ravenred on Jul 29, 2017 19:25:37 GMT -6
I called motion pro and asked the rep there, the classic and the nomad throttle cables mount to the underside of the housing where as the meanstreak and marauder mount in the top rear section of the housing. Motion pro gave me a lead time of 11+ business days to make what I need and I am a bit short on patience lately having had to work out of town through most of the riding season this year. I ended up ordering the cables for the classic and just ordering a right hand switch housing off ebay, ended up costing about $40 less than having them make a set for me. Once they show up I can finish the bar swap and internal wiring and hit the road
|
|
|
Post by ravenred on Aug 11, 2017 15:32:08 GMT -6
The Vulcan classic housing fit perfect, only difference was the wiring to the front brake lever switch but I was already doing internal wiring so I just switched them out while the soldering iron was set up. My throttle cables now mount to the underside of the housing. I am using the cables for a classic which is why I changed the housing.
|
|
|
Post by lee on Aug 13, 2017 19:35:08 GMT -6
Looks good.
|
|
|
Post by Admin on Aug 22, 2017 11:33:37 GMT -6
I use the show chrome nomad boxes as well. Love the cables exiting on bottom
|
|